MAVOWATT 40 便携式电能检测仪图片
The 3-phase power and mains disturbance analyzer MAVOWATT 40 fulfills the standards EN50160, EN61000-4-7 and EN61000-4-15 which are relevant for mains quality measurement, as well as EN61000-4-30 which specifies measuring procedures for voltage quality. The class A device simultaneously monitors RMS values, harmonics, flicker and transients down to a time range of approximately 80 µs.
The MAVOWATT 40 has 8 measuring channels: 4 for voltage and 4 for current. The measuring configuration and the type of electrical circuit is selected automatically based upon detected measured quantities. The type of utilized monitoring with automatic limit value definition is easy to select. Acquired data are saved to CompactFlash memory cards. The instrument can be operated intuitively with the help of icons which appear at the color touch-screen, and selection can be made from amongst German, English, Spanish, Italian, Swedish and French.
The MAVOWATT 40 offers special modes for the recording of switch-on effects and fault note. iAdditionally there is an analysis module integrated for the direction of the voltage drop, switching tops of the power factor correction and the quality of motors.
Data communication is optional possible via RS 232, Ethernet or USB.
- Power and mains disturbance analysis
- Harmonic analysis per EN 61000-4-7
- Mains quality per EN50160 with statistic bar chart
- Flicker analysis per EN 61000-4-15
- Recording of switch-on effects and fault note
- Integrated analysis module for the direction of the voltage drop, switching tops of the power factor correction and the quality of motors
- 8 measuring channels: 4 for voltage (differential) and 4 for current (current sensor), for measurements at 50 / 60 Hz power frequency
- Data storage to CompactFlash memory cards 256 MB (scope of supply)
- Power supply via charging device 90..264 V / 47..63 Hz
- Built-in accumulator for up to 3 hour operating time
- Optional RS232, USB or LAN interface
- Optiional current measuring accessories
- High performance DranView PC analysis and evaluation software is available
ype
|
Description
|
Article No.
|
MAVOWATT 40
|
Basic device
|
M817B
|
MAVOWATT 40 Set 1
|
MAVOWATT 40
+3 Current probes TR-2500A + Soft carrying case + Dranview Pro Software |
M817F
|
MAVOWATT 40 Set 2
|
MAVOWATT 40
+3 Current probes TR-2510A + Soft carrying case + Dranview Pro Software |
M817J
|
MAVOWATT 40 Set 3
|
MAVOWATT 40
+3 Current sensors DRANFLEX 3000XL + Power adapter RR/PS/4EU + Soft carrying case + Dranview Pro Software |
M817N
|